playgrounds importados

Sunray Premium Playgrounds are high-quality playgrounds manufactured in America and sold at gardening centers, warehouse stores and individual retailers across the United States and Canada. Sunray prides themselves in harvesting their swing set lumber with sustainable lumbering practices and rot resistant, smooth cutting and easy to stain wood. With careful maintenance, assembly, and preventative care, your Sunray swing set should last until your children outgrow it. When installing your Sunray swing set, take care to follow proper safety precautions such as wearing safety goggles, gloves and use tools that are in good working order.

• Check your manual for step-by-step guidance in assembling your Sunray swing set. If you have lost your manual, you can find it at Sunray's website in a PDF format. Put on your safety goggles and your gloves before you start working  backyard playground equipment
  

  
  
  
  

  
  

• Sort the parts that came with your Sunray swing set. Put wood and non-wood parts together in accordance to each step of the assembly, which roughly translates to one page of the manual. Be sure to use a hard surface in which to sort out your items so you don't lose items. Check off the parts in the parts inventory listings as you go through to make sure that every piece is accounted for.

• Read all of the instructions for the first step. Sunray strongly recommends reading the entire step out of the manual before proceeding to assembling the parts. Your assembly will start with the picnic table. Set the counter sunk holes on the table legs down and begin your assembly according to the instructions, carefully following the diagrams in step one.

• Pre-drill all the required holes in step two with a 1/8" drill bit and assemble the upright assembly according to the directions. Move on to the main beam installation, pre-drilling your holes before moving on to this step and then assembling the beams according to the diagrams in this step. Ready the slats for assembly and screw them down in accordance with the diagram, placing your screws at either end and sunk into the beam in the middle. Now install your angled braces.

Angel playground share this (video & message) from internet, Welcome visting on angel playground equipment